wipe new trim restorer

Wipe New® is more easily removed from unintended surfaces if it is wiped off immediately. Within the first hour (only) of application, Acetone can be used to remove Wipe New® from painted surfaces (see included cautions for use of Acetone).

Can Wipe New be removed?

Although it is more easily removed if wiped from undesirable surfaces immediately, cured Wipe New® can be removed from paint using a small amount of polishing compound. We recommend that you apply the compound to a microfiber cloth then work it into the affected area in a circular motion.

How do you use Rust Oleum Wipe new trim restorer?

Since you only apply Wipe New® in a single wipe across the surface with very little overlap, 1.5 ounces is enough, in most cases, to treat the interior or exterior of an average mid-sized vehicle. If the surface is badly faded and/or porous, a second application may be needed for the best effect.

Can you paint over Wipe New?

Wipe New’s Protection Guarantee does not extend to the use of ReColor on painted surfaces.

Can Wipe New be applied twice?

V If Wipe New begins to dry on the applicator cloth, streaking may occur. If the applicator cloth is still damp, you can rewet it with more Wipe New. Once the applicator cloth dries out completely, it cannot be reused and must be discarded.

Can I use Wipe New twice?

Can Wipe New Be Applied Twice? You will need to use a fine polishing compound or high-quality automotive sandpaper to remove Wipe New after it has cured. Rewet the applicator cloth with more Wipe New if it is still damp. It is not possible to reuse the applicator cloth once it has dried out completely.

How long does it take for Wipe New to cure?

We recommend that you allow 1 hour of drying time before touching the surface and a full 24 hours after applying Wipe New® before exposure to moisture of any kind. If the surface gets wet before Wipe New® cures, you may see streaking or spotting in the finish. A second coat of Wipe New® will not resolve this issue.

Can you use Wipe New on metal?

Wipe New ReColor instantly renews and restores color and shine to faded surfaces including plastic, metal, vinyl, fiberglass, stone and composites.

Can you use Wipe New on leather?

What is it? a liquid you can use to make much of the interior and exterior of your car look like new again. It works on dashboards, door panels, leather and vinyl seats and trim. On the exterior of your car, Wipe New will work on bumpers and trim, mirror housings and faded plastic.

What is Wipe New used for?

Wipe New Trim Restore renews, restores and protects worn automotive trim and plastic. Great for door panels, trim, side mirrors, bumpers, dashboards, leather and vinyl seats & more.

What chemical is in Wipe New?

This liquid is a sealant that restores and permanently protects hard surfaces; the formulation is proprietary but includes: CAS 98-56-6 Benzene, 1-chloro-4-(trifluoromethyl) CAS 540-88-5 tert-Butyl acetate The primary ingredient in this product is considered to be hazardous by OSHA (as defined in the OSHA Hazard

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmeYpMRusM5msKitXaeyrrvVnmSnnadixKq8xGaqraqVlri0ecKhnJyjXZ7BbrvUrWSwoaCaeq%2Bx1marq6GdYr%2Bmv9OoqZ6qXw%3D%3D