chainsaw chain direction

The correct direction for a blade to face is with the pointy edge of the blade teeth facing toward the way the blade rotates. Essentially, you want the pointy edges of the blades rotating on top of the chain bar, moving toward the tip of the bar, and away from the body of the machine.

Why does the chain keep coming off my chainsaw?

Chainsaw chains come off the bar due to worn-out bars, worn-out sprockets, and wrongly set tension. You should also note that with continued use, chains lose their tension and hence are more likely to come off the bar when you least expect it.

Why is my chainsaw not cutting with a new chain?

The most common cause of a chainsaw that won’t cut properly is a dull cutting chain. Try sharpening or replacing the chain. The chain may not have the proper amount of tension. If the adjustment screw is too loose, the chain may not make good contact with the wood.

Why is my chainsaw blade smoking?

This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.

How tight should the chain be on a chainsaw?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can’t pull the drive links out of the bar nose.

Why does my chainsaw not cut in a straight line?

Not Cutting Straight

If the chain is cutting to the left that means the right teeth on the chain are longer, and vise versa. To correct, sharpen only the side with the longer teeth. If the bar has worn unevenly it will also cause the chain to not cut straight.

Why is my chainsaw burning the wood?

Your chainsaw burns wood because of poor lubrication

Lubrication allows the mechanical parts to coordinate much better by avoiding a phenomenon of friction which risks causing traces of burns. This is one of the main reasons that your appliance gives off too much heat and that the wood burns.

Do new chainsaw chains come sharpened?

Yes, the chains of the chainsaw come sharpened from the factory when you buy a new one. There is no need to sharpen it before your first job. But even the sharpest chain for the chainsaws available in the market will lose their sharpness over time and grow very dull.

Why does my chainsaw blade go dull so fast?

Many chainsaw enthusiasts have noted that their blades dull faster when they’re cutting muddy wood. If the logs that you’re cutting up are muddy, then perhaps that is the sole reason why your blade is dulling too fast. It won’t be hard to notice whether the wood that you’re cutting is dirty or not.

Why does my chainsaw cut on a angle?

●

If the chain isn’t sharpened properly, one side of it has longer teeth than the other. Your chainsaw will most certainly cut at an angle. Sharpening the chain properly would eliminate this problem. As a preventative measure, you should equally sharpen all your chain’s cutter teeth always.

How many times can you sharpen a chainsaw chain?

A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It’s mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmennbaktIywmLJllKSytHnToZxmm5iWtq95xqhkqKZdlnqktMCipayZp2KwqbHCpGSirF2kwrV5wqGYoqajlsRur8eaoKdllJ6%2Fpq%2FToqanZw%3D%3D